: home : site map : contact us :
 |
PT100 Industrial Probes
|
Order Code |
|
T/C Type |
Operating Temperature |
Probe Dimensions |
Description & Applications |
||||||||||||||||||||||||||
|
|
|
|
|
This self-adhesive patch probe is suitable for measuring surface temperature where the accuracy of a PT100 sensor is required. Supplied with a two metre PVC lead (3-wire). Maximum temperature +125°C. |
||||||||||||||||||||||||||
|
|
|
|
|
This standard range of low cost PT100 industrial probes (to BS 1904: Class B) is suitable for a wide variety of industrial applications. Each probe is supplied with a two metre PVC lead, 3-wire configuration. Maximum temperature +100°C. |
||||||||||||||||||||||||||
|
|
|
|
|
The heavy duty PT100 probe is suitable for a wide variety of permanent installations. Supplied complete with an alloy terminal head (3-wire configuration). Maximum temperature +200°C. |
||||||||||||||||||||||||||
|
|
|
|
|
These wall-mounted air probes are housed in an ABS case for surface mounting. Two models available with (160-481) or without 2 metre PVC lead (160-480). Maximum temperature +80°C. |
Platinum
Resistance Probes
Platinum
Resistance Probes (PT100) are high accuracy probes which exhibit a change in
resistance with a change of temperature. High purity platinum wire is used
to produce the resistance thermometer detectors (RTD). Platinum resistance
probes cover a wide temperature range but generally, the response times are
slower than thermocouples. PT100 probes tend to be larger and are not
particularly suitable for the measurement of surface temperatures. Our
standard PT100 platinum probes use a three wire configuration to eliminate
the effects of cable resistance variations.
PT100 ACCURACIES/TOLERANCES TABLE
|
Type |
Description/Conductors |
Temperature Range |
BS EN 60584-2:1993 Class 1 Tolerances |
Thermocouple Probe Tolerances |
||
|
PT100
|
Platinum Resistance Copper/Copper/Copper (Cu/Cu/Cu) |
-200°C to +600°C |
|
|
| Copyright 2004 © Rototherm ® |