: home : site map : contact us :

ETI-8810 Infrared Hand Held Thermometer
The ETI-8810 portable gun-shaped infrared thermometer is compact, lightweight and easy to use. Simply aim, pull the trigger and display the surface temperature of the item being measured. The ETI-8810 gives a digital read-out of temperature over the range of -20 to +270°C with an assured accuracy of ±2%/±2°C of reading in an ambient temperature of between +15°C and +25°C, with a repeatability of ±1°C of reading. The instrument incorporates a clear, easy to read, LCD display with 'Low Battery', 'Laser' and 'Backlight' indication. The ETI-8810 infrared thermometer incorporates an auto power off facility which automatically turns the instrument off after seven seconds, maximising battery life. The units are powered by a 9 volt MN1604/PP3 battery with a life of approximately 100 hours continuous use. The ETI-8810 is ideal for measuring product temperatures, eliminating the need to touch or contaminate the substance you are measuring, avoiding the risk of cross-contamination. The ETI-8810 can be used by anyone as there is no need to focus or calibrate the instrument.

The ETI-8810 infrared thermometer features an easy to use four-button keypad, allowing the user to turn on/off the LCD backlight and laser alignment and select °C or °F.

The ETI-8810 incorporates laser assisted alignment as standard, to assist in pin-pointing the area of measurement. The unit incorporates an 8:1 optic ratio (target distance/diameter ratio) and a fixed emissivity of 0.95.

Range                                           
-20 to +270°C
Resolution                                     
1°C or °F
Response Time                              
Approximately one second
Infrared Accuracy                           
± 2% of reading or ± 2°C whichever is greater
Field Of View                                 
8:1 optics ratio (25mm minimum target)
Emissivity                                      
Fixed at 0.95
Battery Life                                    
100 hours
Battery                                          
9 volt MN1604/PP3
Display                                          
Custom LCD
Dimensions                                   
58 x 79 x 159mm
Weight                                          
180 grams

Order Code 814-020

Eurotron MiniRay Infrared ThermometerThe MiniRay 100 infrared thermometers are simple, easy to use and ideal for measuring surface temperatures (other than bare metals) in awkward places inaccessible to contact thermometers or where probing a substance is not desirable. Simply aim, pull the trigger and read the temperature, eliminating the need to touch or contaminate the product you are measuring. The MiniRay 100 infrared thermometers are ideal instruments for non-contact temperature monitoring and measurement, measuring the temperature quickly and easily. Specifically designed for non-destructive testing with storage applications in mind, the MiniRay is ready to measure temperature where it is critically important in maintaining quality and in situations where complying with government regulations is a necessity.  These include storage warehouses, heating and ventilating, air conditioning applications etc.

The MiniRay infrared thermometers measure temperature over the range of -32 to +520°C with an accuracy of 1% of the reading or ±1.5°C, whichever is greater. The instruments incorporate a backlit custom 3½-digit LCD display with 'Max', 'Min', 'Emissivity', 'Hold', '°C', '°F' and 'Low Battery' indication.

Three models are available, the MiniRay 100, 100 L and 100 XL, both the 100 L and 100 XL have circular laser alignment as standard. The MiniRay 100 and 100 L incorporate 12:1 optics ratio (target distance/diameter ratio) whilst the 100 XL utilises 30:1 optics. All models feature 'Adjustable Emissivity' (0.30 to 1.00), 'Max', 'Min', 'Average', 'Display Hold', 'Hi/Lo Alarms' and 'Last Reading Recall'.

MINIRAY 100 SERIES
Range                                             
-32 to +520°C
Resolution                                     
0.1°C up to +199.9°C otherwise 1°C
Response Time                              
500msec
Accuracy                                       
±1.5°C (-32 to +23°C)
±1% of reading or ±1°C (+23 to +520°C)
Accuracy of PT100 Input                 
±0.25% of reading or ±0.5°C
Emissivity                                      
Adjustable 0.3 to 1.0
Battery Life                                    
60 hours (excluding backlight & laser use)
Battery                                          
4 x AA - MN1500 alkaline
Display                                          
Custom 3½-digit LCD display
Dimensions                                   
180 x 140 x 45mm
Weight                                          
380 grams

Order Code / Description
814-100 / MiniRay 100
814-105 / MiniRay 100L with laser sighting
814-110 / MiniRay 100 XL with laser sighting

Two Instruments in One

The Miniray infrared thermometers incorporate, as standard, the facility to accept a PT100 thermometers probe for contact temperature measurement, these probes are supplied as an optional extra.

HAND HELD PT100 THERMOMETER PROBES
161-000            Surface Probe                                             Ø 4.5 x 130mm
161-060            Between Pack Probe                                   Ø 6 x 130mm
161-160            Penetration Probe                                       Ø 3.3 x 130mm
161-220            Liquid Probe                                               Ø 3.3 x 130mm
161-300            Air/Gas Probe                                             Ø 3.3 x 130mm
161-372            Wire Air Probe                                            Ø 3.7 x 1000mm

The above Probes are suitable for use with Miniray 100 Infrared Thermometers

TN1 Tiny Infrared Thermometer
The TN1 thermometer is a non-contact infrared thermometer, possibly the smallest infrared thermometer on the market today, measuring only 18 x 37 x 68mm and weighing just 32 grams. Simply aim the thermometer at the target and press the measurement button to display the surface temperature. The TN1 indicates temperature over the range of -22°C to +110°C with a resolution of 0.1°C. The distance to target ratio is 1:1 therefore the thermometer should be positioned as close to the target as possible without the need to touch the surface being measured. The TN1 infrared thermometer incorporates maximum, minimum and lock (continuous) functions and is switchable between °C and °F. The unit is supplied with a default emissivity of 0.95, however, the emissivity can be changed from 0.01 to 1. Changes to the emissivity should only be carried out by experienced personnel.

Order Code / 814-050

MODEL                                                           TN1
Field Of View                                                    1:1 Optics ratio
Response Time                                                  1 Second
Range                                                              -22 to +110°C
Resolution                                                         0.1°C or °F (Switchable)
Accuracy                                                         ±2% of Reading or ±2°C
Emissivity                                                         default at 0.95
Dimensions                                                       18 x 37 x 68mm
Weight                                                             32 grams

TN2 Infrared Thermometer
The TN2 is a non-contact infrared thermometer, measuring only 18 x 50 x 100mm and weighing just 62 grams. Simply aim the thermometer at the target and press the read button to display the surface temperature. The TN2 indicates temperature over the range of -33°C to +220°C with a resolution of 0.1°C. The TN2 infrared thermometer incorporates maximum, minimum and lock (continuous) functions and is switchable between °C and °F. The unit is supplied with a default emissivity of 0.95, however, the emissivity can be changed from 0.01 to 1. 

Order Code / 814-055

The TN2 thermometer incorporates an optical lens that measures temperature by sensing the amount of radiated energy at infrared frequencies. Using this data and the actual temperature of the infrared sensor (thermopile), the TN2 can calculate the temperature of the surface that emitted the energy.

The distance to target ratio is 3:1 therefore the thermometer should be positioned as close to the target as practical.

Field Of View                                                    1:3 Optics ratio
Response Time                                                 1 Second
Range                                                             -33 to +220°C
Resolution                                                        0.1°C or °F (Switchable)
Accuracy                                                         ±2% of Reading or ±2°C
Emissivity                                                         default at 0.95
Dimensions                                                       18 x 50 x 100mm
Weight                                                             62 grams

TCT Combo Infrared Thermometer
The TCT Combo is two instruments in one - a digital, non-contact, infrared thermometer and a traditional, digital, probe insertion thermometer combined in one compact, pocket-sized, unit.

The TCT non-contact infrared thermometer indicates temperature over the range of -33 to +220°C with a resolution of 0.1°C. The distance to target ratio is 1:1 therefore the thermometer should be positioned as close to the target as possible without the need to touch the surface being measured.

Additionally, it is possible to take liquid or core temperatures using the pointed insertion probe (Ø3.3 x 120mm) that conveniently folds away into the side of the instrument when not in use.

Order Code / 814-060